AGRULINE · FM Approved

FM 1613 approved PE100-RC underground fire mains

AGRU PE100-RC pipes and fittings, FM approved to Approval Standard 1613, for the underground main that carries water from the source to the building entrance. Tested under extreme conditions and successfully installed for more than ten years.

AGRU PE100-RC fire main with electrofusion fittings and a flanged gate valve
Ø 63 ÷ 630
mm, pipes and fittings
215 psi
15 bar · SDR 11
250 psi
17.5 bar · SDR 9

Why PE100-RC for fire mains

  • No corrosion or scaling: no debris to clog the sprinklers
  • Welded joints as strong as the pipe: no thrust blocks needed
  • Withstands soil settlement and earthquakes, water hammer, point loads and roots
  • FM approved components can lower property insurance premiums

A complete system

Pipes in 12 m lengths, electrofusion and butt fusion fittings, 1.5 D sweep bends, DIN (EN 1092-1) and ANSI (B16.5 Class 150) stub ends and backing rings for valves and hydrants. Standards: FM 1613, EN 12201, ISO 4427, EN ISO 15494, AWWA C906, FM DS 3-10 and NFPA 24.

Frequently asked questions

What is FM 1613 approval?+

It is the FM Approvals standard for polyethylene pipes and fittings in underground fire mains. Every component withstands a water hammer surge of 3.2 times the rated pressure without failure.

Which pressure class should I choose?+

There are two classes: 215 psi (15 bar, SDR 11) and 250 psi (17.5 bar, SDR 9), referring to the maximum operating pressure at 23 °C. We help you choose class, diameters and components for your project.

Is there technical documentation?+

Yes: the AGRU FM 1613 technical catalogue (design, installation, testing and full range) and the product sheet can be downloaded from the AGRU section of the site.

Need a quote?

Write or call us: we reply with availability, prices and timing.

Request a quote